Hitech Industries Bangalore - Hyper 4 Valve Less Hammers HTM 400, Heat Treatment Servises

The HTH400 is valueless DTH Hammer designed for drilling 105mm - 140mm (4.5 – 5.5") dia. Holes over wide range of operating air pressures. HTH400 gives upto 20% increase in performance Achieved through improved hammer cycle and greater blow energy output. The hammer can be used for wide range of applications The HTH400 is supplied with a 23/8" API REG. pin Blackhead, as standard but other connections are available on request.

Complete Hammer

Back Head HTH402

Check Valve HTH404

Diverter HTH412

Buffer Tube HTH414

Compression Ring HTH413

Tube Holder HTH409

Control Tube HTH406

Piston HTH403

Wear Sleeve HTH401

Piston Release Ring HTH408

Bit Retainer HTH410

Chuck Release Washer HTH407

Front Chuck HTH411

Bit HTHB400

Hammer Specification

Diameter 95.0 mm

Hole Range 105.0 mm -140.0 mm

Bore 76.19 mm

Hammer Weight 75.0 kg

Length Shoulder to Shoulder 1065.0 mm

Length Shoulder to Bit Face 1145.0mm

Standard API thread 23/8" API REG

Piston Diameter 76.13 mm

Piston Weight 8.3kg

Bit Shank Length 208.0 mm

Width of the Back head slot 76.20

Adaptable Bit Range DHD 340A

Air Consumption

Psi CFM BAR Cu. Mtr/Min

150 150 10.3 4.2

200 232 13.8 6.5

250 325 17.2 9.2

300 427 20.7 12.1

SEND MAIL

Hi-Tech Hammers